The adjustment mechanism is attached to the seat with four 6×25 bolts. Let’s take a closer look at the seat: Let’s measure the length
armrests:
Adjustment
chair height is made by pressing the lever. < br />Then flipped: The review was published in accordance with clause 18 of the Site Rules. At the same time, let’s take a closer look at the seams:
The pillows are fastened with elastic straps that have plastic fasteners: Lined with soft pads on top:
The stand moves freely inside the guides, but there is no free play:
Assembled:
Only 5 wheels: The armrest has a prefabricated structure, which is bent with a hinge. Mounting holes are oval in shape to allow slight adjustment during mounting. The lumbar pillow contains foam rubber: The hinge has plastic plugs.
The holes are oval shaped for slight adjustment. The first step is to attach the adjustment mechanism to the seat. Seat height adjustment lever:
Naturally, let’s unfasten the fasteners.
There are holes on the back, in the upper part, which are decorated with plastic inserts:
Measure the wall thickness:
In general, we have a fairly comfortable and durable chair that can withstand a load of 120 kg.
Backrest tilt adjustment lever and backrest height adjustment lever: I present a review of a fairly popular product now – a gaming computer chair. Let’s disassemble:
The footrest rotates freely on a metal tube.
The next step is to install the footrest:
The fifth point is to attach the palm rests or armrests.
Close up the soft pad to assess the quality of the seams:
A bolt is attached to one side of the footrest, which limits the movement of the stand when it is extended:
The stand is inserted into plastic guides, which in turn are fastened with two bolts to the bottom of the seat:
The product was provided for writing a review by the store. The quality of the seams is normal:
The adjustment is made by moving the backrest and tightening the knob. Good afternoon everyone.
The seventh point according to the instructions is to install the gas lift into the base.
If there is a zipper, then you need to unzip it and see what’s inside:
The last step is to fix the pillows for the waist and neck.
The wheels are simply inserted into the seats on the cross.
To do this, insert the T-piece into the mounting hole. You need a hex wrench, which is also included in the kit.

Computer gaming chair with footrest.

The last numbered item is the installation of a chair on a gas lift.
The hinge on the armrest allows it to move along with the tilt of the back, which guarantees a comfortable position:
Then the backrest is installed in the adjustment mechanism. No one has been using leatherette in furniture production for many years. All the holes matched with the mounting points, the bolts screwed in without problems. All the bolts have come to the attachment points: The greatest convenience can be felt while playing games in the console with a joystick, as well as watching movies.
The mechanism for adjusting the chair is also a supporting frame to which all the main elements of the chair are attached.
No suspicious defects were found.
There is a sticker on the bottom of the seat that indicates where the front of the seat is. Upper position:
Close up the stand element to see the quality of the seams:
The gas lift is installed with a casing in the crosspiece.
And the Chinese put hair in the neck pillow (just kidding) to make it softer: Let’s take it off:
The upholstery material of this chair is PU-leather. It sits tightly in its seat, it is not very easy to disassemble in the future: There are holes cut in the skin, it doesn’t look very neat, but everything will be closed with a mount: The pipes look solid, I measured the wall thickness: The stops are screwed with 8×40 bolts, simultaneously to the back and seat. The gas lift is easy to disassemble, just remove the locking plate. The seat height and backrest are adjustable.
On
there is a zipper on the back:
The manufacturer kindly provided instructions:
There are several adjustment elements on the mechanism.
The third point is the metal element of the backrest fastening to the adjustment mechanism. in the review I will describe the assembly process with detailed photographs. The frame looks very solid: It is attached with three 6×40 bolts to the back of the backrest:
Assembly is simple. Armrests are made of plastic. When the handle is turned, the pipe is compressed, which prevents it from moving: According to the instructions, only 8 points, the last point is not numbered.
The backrest is made in the shape of a car seat, has side stops and ergonomic design: First unscrew the adjustment knob: Review published in accordance with clause 18 of the Rules
The armrests are attached to the protruding elements on the back and seat: You need to make an effort: https://jiji.ng/165-roofing-materials/long Faux leather upholstery. Wheels with rubber pads to avoid scratching the floor:
The footrest just pulls forward:
Lower position: Everything fits tightly, there is no play, disassembly of this connection can also cause problems:
Inside the filler is made of a material that resembles foam rubber, you can also see the frame.
The T-shaped element also has oval holes for fastening. Let’s take a closer look at the pillows:
After unpacking the package, we get the following set:
The pillows themselves have zippers. It is a very soft material that retains its properties over a very wide temperature range. Polyurethane leather allows air to pass through, as it contains micropores.
The cross is made of plastic, which looks very durable. The product was provided for writing a review by the store. The chair has an interesting coloring that catches the eye.
And just in case, the height: All the bolts fit to the mounting points:
Assembly of the cross with wheels: It is a steel pipe welded in the shape of the letter T. Made of fairly thick metal and looks very massive. The frame is made of steel pipe, there are threaded rivets for fastening the back. everything is covered with cellophane.